Add pb-rfm69-cape.

This commit is contained in:
flabbergast 2018-07-02 18:37:43 +01:00
parent 3952605e63
commit 7c02e3f9b8
10 changed files with 4753 additions and 0 deletions

View File

@ -5,3 +5,23 @@
This is a PCB for a 45% keyboard. Supports ALPS and Cherry MX switches. No LEDs, only one SMT LED on the front bottom side. The supported layouts are [this](http://www.keyboard-layout-editor.com/##@@=Tab&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&=%7C%0A%5C&=Back%3Cbr%3ESpace%3B&@_w:1.25%3B&=Ctrl&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F:%0A%2F%3B&_w:1.75%3B&=Enter%3B&@_w:1.75%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=%3C%0A.&=%3E&_w:1.25%3B&=Shift&=Fn%3B&@_x:1.25%3B&=Alt&_w:1.25%3B&=Cmd&_a:7&w:2.25%3B&=&_a:7&w:2.75%3B&=&_a:4&w:1.25%3B&=Cmd&=Alt&=Meta) and [this](http://www.keyboard-layout-editor.com/##@@=Tab&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&=%7C%0A%5C&=Back%3Cbr%3ESpace%3B&@_w:1.25%3B&=Ctrl&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F:%0A%2F%3B&_w:1.75%3B&=Enter%3B&@_w:1.75%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=%3C%0A.&=%3E&_w:1.25%3B&=Shift&=Fn%3B&@_x:1.25%3B&=Alt&_w:1.25%3B&=Cmd&_a:7&w:6.25%3B&=&=Alt&=Meta).
The controller MCU is STM32F042K6T7 - 32kB flash, 6kB RAM, DFU bootloader in ROM, LQFP-32 package. The BOOT0 pin for entering the bootloader on power up is brought out to a pushbutton on the bottom side of the PCB.
## stm32_qfp48_breakout
A.K.A. [the bat board]. A Teensy-sized breakout for STM32* MCUs in QFP48 package. Tested with STM32L052CxTx, STM32F072CxTx, STM32F103CxT6. Please see the main page ([the bat board]) for more information, documentation and how to make yourself and/or order one of these.
[the bat board]: https://flabbergast.drak.xyz/bat-board/
## serplus-batshield
This is a simple shield for [the bat board]. The main purpose is to turn a bat board into an USB-to-serial device, but there are a couple of extra things (button, RGB LED, ...). Please see [this page](https://flabbergast.drak.xyz/posts/serplus-shield/) for documentation, some pictures and links to relevant firmware.
## pocketb_rfm69
A half-mounted [Pocket Beagle] cape with RFM69 radio, atmega328p, RTC,
atsha204, a few status LEDs, and a JST connector for Pocket Beagle backup
power. See [this page](https://flabbergast.drak.xyz/posts/pb-rfmcape/) for
some photos and a little documentation.
[Pocket Beagle]: https://beagleboard.org/pocket

View File

@ -0,0 +1,2 @@
(fp_lib_table
)

Binary file not shown.

After

Width:  |  Height:  |  Size: 372 KiB

View File

@ -0,0 +1,422 @@
EESchema-LIBRARY Version 2.3
#encoding utf-8
#
# +3V3
#
DEF +3V3 #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -150 50 H I C CNN
F1 "+3V3" 0 140 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
ALIAS +3.3V
DRAW
P 2 0 1 0 -30 50 0 100 N
P 2 0 1 0 0 0 0 100 N
P 2 0 1 0 0 100 30 50 N
X +3V3 1 0 0 0 U 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# +5V
#
DEF +5V #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -150 50 H I C CNN
F1 "+5V" 0 140 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
P 2 0 1 0 -30 50 0 100 N
P 2 0 1 0 0 0 0 100 N
P 2 0 1 0 0 100 30 50 N
X +5V 1 0 0 0 U 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# ATMEGA168A-AU
#
DEF ATMEGA168A-AU U 0 40 Y Y 1 F N
F0 "U" -750 1250 50 H V L BNN
F1 "ATMEGA168A-AU" 400 -1400 50 H V L BNN
F2 "Package_QFP:TQFP-32_7x7mm_P0.8mm" 0 0 50 H I C CIN
F3 "" 0 0 50 H I C CNN
ALIAS ATMEGA48A-AU ATMEGA48PA-AU ATMEGA88A-AU ATMEGA88PA-AU ATMEGA168PA-AU ATMEGA328-AU ATMEGA328P-AU
$FPLIST
TQFP*7x7mm*P0.8mm*
$ENDFPLIST
DRAW
S -750 1200 850 -1300 0 1 10 f
X (PCINT19/OC2B/INT1)PD3 1 1000 -800 150 L 40 40 1 1 B
X (PCINT20/XCK/T0)PD4 2 1000 -900 150 L 40 40 1 1 B
X GND 3 -900 -1200 150 R 40 40 1 1 W
X VCC 4 -900 1100 150 R 40 40 1 1 W
X GND 5 -900 -1100 150 R 40 40 1 1 W
X VCC 6 -900 1000 150 R 40 40 1 1 W
X (PCINT6/XTAL1/TOSC1)PB6 7 1000 500 150 L 40 40 1 1 B
X (PCINT7/XTAL2/TOSC2)PB7 8 1000 400 150 L 40 40 1 1 B
X (PCINT21/OC0B/T1)PD5 9 1000 -1000 150 L 40 40 1 1 B
X (PCINT22/OC0A/AIN0)PD6 10 1000 -1100 150 L 40 40 1 1 B
X AREF 20 -900 500 150 R 40 40 1 1 B
X (PCINT16/RXD)PD0 30 1000 -500 150 L 40 40 1 1 B
X (PCINT23/AIN1)PD7 11 1000 -1200 150 L 40 40 1 1 B
X GND 21 -900 -1000 150 R 40 40 1 1 W
X (PCINT17/TXD)PD1 31 1000 -600 150 L 40 40 1 1 B
X (PCINT0/CLKO/ICP1)PB0 12 1000 1100 150 L 40 40 1 1 B
X ADC7 22 -900 -350 150 R 40 40 1 1 I
X (PCINT18/INT0)PD2 32 1000 -700 150 L 40 40 1 1 B
X (PCINT1/OC1A)PB1 13 1000 1000 150 L 40 40 1 1 B
X (PCINT8/ADC0)PC0 23 1000 250 150 L 40 40 1 1 B
X (PCINT2/OC1B/~SS~)PB2 14 1000 900 150 L 40 40 1 1 B
X (PCINT9/ADC1)PC1 24 1000 150 150 L 40 40 1 1 B
X (PCINT3/OC2A/MOSI)PB3 15 1000 800 150 L 40 40 1 1 B
X (PCINT10/ADC2)PC2 25 1000 50 150 L 40 40 1 1 B
X (PCINT4/MISO)PB4 16 1000 700 150 L 40 40 1 1 B
X (PCINT11/ADC3)PC3 26 1000 -50 150 L 40 40 1 1 B
X (PCINT5/SCK)PB5 17 1000 600 150 L 40 40 1 1 B
X (PCINT12/SDA/ADC4)PC4 27 1000 -150 150 L 40 40 1 1 B
X AVCC 18 -900 800 150 R 40 40 1 1 W
X (PCINT13/SCL/ADC5)PC5 28 1000 -250 150 L 40 40 1 1 B
X ADC6 19 -900 -250 150 R 40 40 1 1 I
X (PCINT14/~RESET~)PC6 29 1000 -350 150 L 40 40 1 1 B
ENDDRAW
ENDDEF
#
# ATSHA204A_3LEAD
#
DEF ATSHA204A_3LEAD U 0 40 Y Y 1 F N
F0 "U" -350 250 40 H V C CNN
F1 "ATSHA204A_3LEAD" -150 -250 40 H V C CNN
F2 "SOT-23_Handsoldering" -250 0 30 H I C CIN
F3 "" 0 0 60 H V C CNN
$FPLIST
SOT-23*
$ENDFPLIST
DRAW
S -400 200 0 -200 0 1 10 f
X SDA 1 -550 0 150 R 40 40 1 1 B
X VCC 2 -200 350 150 D 40 40 1 1 W
X GND 3 -200 -350 150 U 40 40 1 1 W
ENDDRAW
ENDDEF
#
# Battery_Cell
#
DEF Battery_Cell BT 0 0 N N 1 F N
F0 "BT" 100 100 50 H V L CNN
F1 "Battery_Cell" 100 0 50 H V L CNN
F2 "" 0 60 50 V I C CNN
F3 "" 0 60 50 V I C CNN
DRAW
S -90 70 90 60 0 1 0 F
S -62 47 58 27 0 1 0 F
P 2 0 1 0 0 30 0 0 N
P 2 0 1 0 0 70 0 100 N
P 2 0 1 10 20 135 60 135 N
P 2 0 1 10 40 155 40 115 N
X + 1 0 200 100 D 50 50 1 1 P
X - 2 0 -100 100 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# C_Small
#
DEF C_Small C 0 10 N N 1 F N
F0 "C" 10 70 50 H V L CNN
F1 "C_Small" 10 -80 50 H V L CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
C_*
$ENDFPLIST
DRAW
P 2 0 1 13 -60 -20 60 -20 N
P 2 0 1 12 -60 20 60 20 N
X ~ 1 0 100 80 D 50 50 1 1 P
X ~ 2 0 -100 80 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Conn_01x01_Female
#
DEF Conn_01x01_Female J 0 40 Y N 1 F N
F0 "J" 0 100 50 H V C CNN
F1 "Conn_01x01_Female" 0 -100 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
A 0 0 20 901 -901 1 1 6 N 0 20 0 -20
P 2 1 1 6 -50 0 -20 0 N
X Pin_1 1 -200 0 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Conn_01x02
#
DEF Conn_01x02 J 0 40 Y N 1 F N
F0 "J" 0 100 50 H V C CNN
F1 "Conn_01x02" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S -50 -95 0 -105 1 1 6 N
S -50 5 0 -5 1 1 6 N
S -50 50 50 -150 1 1 10 f
X Pin_1 1 -200 0 150 R 50 50 1 1 P
X Pin_2 2 -200 -100 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Conn_01x14
#
DEF Conn_01x14 J 0 40 Y N 1 F N
F0 "J" 0 700 50 H V C CNN
F1 "Conn_01x14" 0 -800 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S -50 -695 0 -705 1 1 6 N
S -50 -595 0 -605 1 1 6 N
S -50 -495 0 -505 1 1 6 N
S -50 -395 0 -405 1 1 6 N
S -50 -295 0 -305 1 1 6 N
S -50 -195 0 -205 1 1 6 N
S -50 -95 0 -105 1 1 6 N
S -50 5 0 -5 1 1 6 N
S -50 105 0 95 1 1 6 N
S -50 205 0 195 1 1 6 N
S -50 305 0 295 1 1 6 N
S -50 405 0 395 1 1 6 N
S -50 505 0 495 1 1 6 N
S -50 605 0 595 1 1 6 N
S -50 650 50 -750 1 1 10 f
X Pin_1 1 -200 600 150 R 50 50 1 1 P
X Pin_2 2 -200 500 150 R 50 50 1 1 P
X Pin_3 3 -200 400 150 R 50 50 1 1 P
X Pin_4 4 -200 300 150 R 50 50 1 1 P
X Pin_5 5 -200 200 150 R 50 50 1 1 P
X Pin_6 6 -200 100 150 R 50 50 1 1 P
X Pin_7 7 -200 0 150 R 50 50 1 1 P
X Pin_8 8 -200 -100 150 R 50 50 1 1 P
X Pin_9 9 -200 -200 150 R 50 50 1 1 P
X Pin_10 10 -200 -300 150 R 50 50 1 1 P
X Pin_11 11 -200 -400 150 R 50 50 1 1 P
X Pin_12 12 -200 -500 150 R 50 50 1 1 P
X Pin_13 13 -200 -600 150 R 50 50 1 1 P
X Pin_14 14 -200 -700 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Crystal
#
DEF Crystal Y 0 40 N N 1 F N
F0 "Y" 0 150 50 H V C CNN
F1 "Crystal" 0 -150 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Crystal*
$ENDFPLIST
DRAW
S -45 100 45 -100 0 1 12 N
P 2 0 1 0 -100 0 -75 0 N
P 2 0 1 20 -75 -50 -75 50 N
P 2 0 1 20 75 -50 75 50 N
P 2 0 1 0 100 0 75 0 N
X 1 1 -150 0 50 R 50 50 1 1 P
X 2 2 150 0 50 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# DS1307+
#
DEF DS1307+ U 0 30 Y Y 1 F N
F0 "U" 270 550 50 H V C CNN
F1 "DS1307+" 300 -550 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
ALIAS DS1307N+ DS1307Z+
$FPLIST
SO8E
DIP-8_300_ELL
$ENDFPLIST
DRAW
S -500 500 500 -500 0 1 0 N
X XTAL1 1 -600 -200 100 R 50 50 1 1 I
X XTAL2 2 -600 -400 100 R 50 50 1 1 O
X VBAT 3 600 -300 100 L 50 50 1 1 I
X GND 4 0 -600 100 U 50 50 1 1 W
X SDA 5 -600 100 100 R 50 50 1 1 B
X SCL 6 -600 300 100 R 50 50 1 1 I C
X SQW/OUT 7 600 300 100 L 50 50 1 1 O
X VCC 8 0 600 100 D 50 50 1 1 W
ENDDRAW
ENDDEF
#
# GND
#
DEF GND #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -250 50 H I C CNN
F1 "GND" 0 -150 50 H V C CNN
F2 "" 0 0 60 H V C CNN
F3 "" 0 0 60 H V C CNN
DRAW
P 6 0 1 0 0 0 0 -50 50 -50 0 -100 -50 -50 0 -50 N
X GND 1 0 0 0 D 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# LED_Small_ALT
#
DEF LED_Small_ALT D 0 10 N N 1 F N
F0 "D" -50 125 50 H V L CNN
F1 "LED_Small_ALT" -175 -100 50 H V L CNN
F2 "" 0 0 50 V I C CNN
F3 "" 0 0 50 V I C CNN
$FPLIST
LED*
$ENDFPLIST
DRAW
P 2 0 1 0 -30 -40 -30 40 N
P 2 0 1 0 40 0 -30 0 N
P 4 0 1 0 30 -40 -30 0 30 40 30 -40 F
P 5 0 1 0 0 30 -20 50 -10 50 -20 50 -20 40 N
P 5 0 1 0 20 50 0 70 10 70 0 70 0 60 N
X K 1 -100 0 70 R 50 50 1 1 P
X A 2 100 0 70 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# PWR_FLAG
#
DEF PWR_FLAG #FLG 0 0 N N 1 F P
F0 "#FLG" 0 75 50 H I C CNN
F1 "PWR_FLAG" 0 150 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
DRAW
X pwr 1 0 0 0 U 50 50 0 0 w
P 6 0 1 0 0 0 0 50 -40 75 0 100 40 75 0 50 N
ENDDRAW
ENDDEF
#
# RFM69HW
#
DEF RFM69HW U 0 40 Y Y 1 F N
F0 "U" -150 450 50 H V C CNN
F1 "RFM69HW" -300 550 50 H V C CNN
F2 "RF_Module:HOPERF-RFM69HW" 0 -600 50 H I C CNN
F3 "" 0 -300 50 H I C CNN
ALIAS RFM69W
$FPLIST
HOPERF*RFM69HW*
$ENDFPLIST
DRAW
S -400 400 400 -400 0 1 10 f
X RESET 1 -500 -200 100 R 50 50 1 1 I
X DIO0 2 500 200 100 L 50 50 1 1 B
X DIO1 3 500 100 100 L 50 50 1 1 B
X DIO2 4 500 0 100 L 50 50 1 1 B
X DIO3 5 500 -100 100 L 50 50 1 1 B
X DIO4 6 500 -200 100 L 50 50 1 1 B
X DIO5 7 500 -300 100 L 50 50 1 1 B
X 3.3V 8 0 500 100 D 50 50 1 1 W
X GND 9 100 -500 100 U 50 50 1 1 W
X ANA 10 500 300 100 L 50 50 1 1 O
X GND 11 100 -500 100 U 50 50 1 1 P N
X SCK 12 -500 300 100 R 50 50 1 1 I
X MISO 13 -500 200 100 R 50 50 1 1 O
X MOSI 14 -500 100 100 R 50 50 1 1 I
X NSS 15 -500 0 100 R 50 50 1 1 I
X NC 16 -100 -500 100 U 50 50 1 1 N N
ENDDRAW
ENDDEF
#
# R_Pack04
#
DEF R_Pack04 RN 0 0 Y N 1 F N
F0 "RN" -300 0 50 V V C CNN
F1 "R_Pack04" 200 0 50 V V C CNN
F2 "" 275 0 50 V I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
DIP*
SOIC*
$ENDFPLIST
DRAW
S -250 -95 150 95 0 1 10 f
S -225 75 -175 -75 0 1 10 N
S -125 75 -75 -75 0 1 10 N
S -25 75 25 -75 0 1 10 N
S 75 75 125 -75 0 1 10 N
P 2 0 1 0 -200 -100 -200 -75 N
P 2 0 1 0 -200 75 -200 100 N
P 2 0 1 0 -100 -100 -100 -75 N
P 2 0 1 0 -100 75 -100 100 N
P 2 0 1 0 0 -100 0 -75 N
P 2 0 1 0 0 75 0 100 N
P 2 0 1 0 100 -100 100 -75 N
P 2 0 1 0 100 75 100 100 N
X R1.1 1 -200 -200 100 U 50 50 1 1 P
X R2.1 2 -100 -200 100 U 50 50 1 1 P
X R3.1 3 0 -200 100 U 50 50 1 1 P
X R4.1 4 100 -200 100 U 50 50 1 1 P
X R4.2 5 100 200 100 D 50 50 1 1 P
X R3.2 6 0 200 100 D 50 50 1 1 P
X R2.2 7 -100 200 100 D 50 50 1 1 P
X R1.2 8 -200 200 100 D 50 50 1 1 P
ENDDRAW
ENDDEF
#
# R_Small
#
DEF R_Small R 0 10 N N 1 F N
F0 "R" 30 20 50 H V L CNN
F1 "R_Small" 30 -40 50 H V L CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
R_*
$ENDFPLIST
DRAW
S -30 70 30 -70 0 1 8 N
X ~ 1 0 100 30 D 50 50 1 1 P
X ~ 2 0 -100 30 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# SolderJumper_3_Open
#
DEF SolderJumper_3_Open JP 0 0 Y N 1 F N
F0 "JP" -100 -100 50 H V C CNN
F1 "SolderJumper_3_Open" 0 110 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
SolderJumper*Open*
$ENDFPLIST
DRAW
A -40 0 40 901 -901 0 1 0 N -40 40 -40 -40
A -40 0 40 901 -901 0 1 0 F -40 40 -40 -40
A 40 0 40 -899 899 0 1 0 N 40 -40 40 40
A 40 0 40 -899 899 0 1 0 F 40 -40 40 40
S -20 40 20 -40 0 1 0 F
P 2 0 1 0 -100 0 -80 0 N
P 2 0 1 0 -40 40 -40 -40 N
P 2 0 1 0 0 -50 0 -40 N
P 2 0 1 0 40 40 40 -40 N
P 2 0 1 0 100 0 80 0 N
X A 1 -200 0 100 R 50 50 1 1 P
X C 2 0 -150 100 U 50 50 1 1 I
X B 3 200 0 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
#End Library

View File

@ -0,0 +1,10 @@
Cmp-Mod V01 Created by CvPcb (2012-11-15 BZR 3804)-testing date = 15/11/2012 21:23:25
BeginCmp
TimeStamp = /50A55ABA;
Reference = P1;
ValeurCmp = CONN_13X2;
IdModule = pin_array_13x2;
EndCmp
EndListe

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,2 @@
EESchema-LIBRARY Version 2.3 Date: 15/11/2012 21:22:43
#End Library

View File

@ -0,0 +1,625 @@
(export (version D)
(design
(source /Users/js/dynamic/general/repos/kicad/pocketb_rfm69/pocketb_rfm69.sch)
(date "Sunday, 28 January 2018 'amt' 09:15:16")
(tool "Eeschema 4.0.7")
(sheet (number 1) (name /) (tstamps /)
(title_block
(title)
(company)
(rev)
(date "zondag 28 september 2014")
(source pocketb_rfm69.sch)
(comment (number 1) (value ""))
(comment (number 2) (value ""))
(comment (number 3) (value ""))
(comment (number 4) (value "")))))
(components
(comp (ref U1)
(value ATMEGA328P-AU)
(footprint Package_QFP:TQFP-32_7x7mm_P0.8mm)
(libsource (lib MCU_Atmel_ATMEGA) (part ATMEGA328P-AU))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BA2C1))
(comp (ref U2)
(value RFM69HW)
(footprint flabbergast:RFM69HW_lesspads)
(libsource (lib RF_AM_FM) (part RFM69HW))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BA4C4))
(comp (ref U3)
(value DS1338C)
(footprint Package_SSOP:MSOP-8_3x3mm_P0.65mm)
(libsource (lib Timer_RTC) (part DS1307+))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BA54C))
(comp (ref U4)
(value ATSHA204A_3LEAD)
(footprint Package_TO_SOT_SMD:SOT-23_Handsoldering)
(libsource (lib flabbergast) (part ATSHA204A_3LEAD))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BA7C3))
(comp (ref J1)
(value P2_main)
(footprint Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical)
(libsource (lib Connector_Generic) (part Conn_01x14))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BAC43))
(comp (ref J2)
(value P2_Batt)
(footprint Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical)
(libsource (lib Connector_Generic) (part Conn_01x02))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BAC94))
(comp (ref Y1)
(value 32768kHz)
(footprint Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal)
(libsource (lib Device) (part Crystal))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BB1A3))
(comp (ref Y2)
(value 16MHz)
(footprint Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal)
(libsource (lib Device) (part Crystal))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BB2C0))
(comp (ref R1)
(value 4k7)
(footprint Resistor_SMD:R_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part R_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BB7C1))
(comp (ref C5)
(value 0.1uF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BB816))
(comp (ref C4)
(value 0.1uF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BC91D))
(comp (ref C3)
(value 0.1uF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BC9AD))
(comp (ref C2)
(value 0.1uF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6BC9E8))
(comp (ref BT1)
(value CR1220)
(footprint flabbergast:Keystone_3001_1x12mm-CoinCell)
(libsource (lib Device) (part Battery_Cell))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C46EA))
(comp (ref R3)
(value 4k7)
(footprint Resistor_SMD:R_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part R_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C51C0))
(comp (ref R2)
(value 4k7)
(footprint Resistor_SMD:R_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part R_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C5283))
(comp (ref C6)
(value 10uF)
(footprint Capacitor_SMD:C_1206_3216Metric_Pad1.24x1.80mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C729A))
(comp (ref R4)
(value 10k)
(footprint Resistor_SMD:R_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part R_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C7AA9))
(comp (ref J3)
(value JST_BATT)
(footprint Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal)
(libsource (lib Connector_Generic) (part Conn_01x02))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CDB5E))
(comp (ref D1)
(value RED)
(footprint LED_SMD:LED_0805_2012Metric_Pad0.97x1.50mm_HandSolder)
(libsource (lib Device) (part LED_Small_ALT))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CDE39))
(comp (ref D2)
(value GREEN)
(footprint LED_SMD:LED_0805_2012Metric_Pad0.97x1.50mm_HandSolder)
(libsource (lib Device) (part LED_Small_ALT))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CDF21))
(comp (ref D3)
(value YELLOW)
(footprint LED_SMD:LED_0805_2012Metric_Pad0.97x1.50mm_HandSolder)
(libsource (lib Device) (part LED_Small_ALT))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CDF7B))
(comp (ref D4)
(value BLUE)
(footprint LED_SMD:LED_0805_2012Metric_Pad0.97x1.50mm_HandSolder)
(libsource (lib Device) (part LED_Small_ALT))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CE0DE))
(comp (ref RN1)
(value 470)
(footprint Resistor_SMD:R_Array_Convex_4x1206)
(libsource (lib Device) (part R_Pack04))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CE44B))
(comp (ref C7)
(value 18pF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6D07F9))
(comp (ref C8)
(value 18pF)
(footprint Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part C_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6D098C))
(comp (ref J4)
(value ANT)
(footprint Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical)
(libsource (lib Connector_Generic) (part Conn_01x01_Female))
(sheetpath (names /) (tstamps /))
(tstamp 5A6D3956))
(comp (ref R5)
(value 10k)
(footprint Resistor_SMD:R_0805_2012Metric_Pad1.15x1.50mm_HandSolder)
(libsource (lib Device) (part R_Small))
(sheetpath (names /) (tstamps /))
(tstamp 5A6CC3DC))
(comp (ref JP2)
(value IRQ)
(footprint flabbergast:GS3)
(libsource (lib Jumper) (part SolderJumper_3_Open))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C9DFB))
(comp (ref JP1)
(value SELECT)
(footprint flabbergast:GS3)
(libsource (lib Jumper) (part SolderJumper_3_Open))
(sheetpath (names /) (tstamps /))
(tstamp 5A6C9D89)))
(libparts
(libpart (lib MCU_Atmel_ATMEGA) (part ATMEGA168A-AU)
(aliases
(alias ATMEGA48A-AU)
(alias ATMEGA48PA-AU)
(alias ATMEGA88A-AU)
(alias ATMEGA88PA-AU)
(alias ATMEGA168PA-AU)
(alias ATMEGA328-AU)
(alias ATMEGA328P-AU))
(description "TQFP32, 16k Flash, 1kB SRAM, 512B EEPROM")
(docs http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8271-8-bit-avr-microcontroller-atmega48a-48pa-88a-88pa-168a-168pa-328-328p_datasheet.pdf)
(footprints
(fp TQFP*7x7mm*P0.8mm*))
(fields
(field (name Reference) U)
(field (name Value) ATMEGA168A-AU)
(field (name Footprint) Package_QFP:TQFP-32_7x7mm_P0.8mm))
(pins
(pin (num 1) (name "(PCINT19/OC2B/INT1)PD3") (type BiDi))
(pin (num 2) (name "(PCINT20/XCK/T0)PD4") (type BiDi))
(pin (num 3) (name GND) (type power_in))
(pin (num 4) (name VCC) (type power_in))
(pin (num 5) (name GND) (type power_in))
(pin (num 6) (name VCC) (type power_in))
(pin (num 7) (name "(PCINT6/XTAL1/TOSC1)PB6") (type BiDi))
(pin (num 8) (name "(PCINT7/XTAL2/TOSC2)PB7") (type BiDi))
(pin (num 9) (name "(PCINT21/OC0B/T1)PD5") (type BiDi))
(pin (num 10) (name "(PCINT22/OC0A/AIN0)PD6") (type BiDi))
(pin (num 11) (name "(PCINT23/AIN1)PD7") (type BiDi))
(pin (num 12) (name "(PCINT0/CLKO/ICP1)PB0") (type BiDi))
(pin (num 13) (name "(PCINT1/OC1A)PB1") (type BiDi))
(pin (num 14) (name "(PCINT2/OC1B/~SS~)PB2") (type BiDi))
(pin (num 15) (name "(PCINT3/OC2A/MOSI)PB3") (type BiDi))
(pin (num 16) (name "(PCINT4/MISO)PB4") (type BiDi))
(pin (num 17) (name "(PCINT5/SCK)PB5") (type BiDi))
(pin (num 18) (name AVCC) (type power_in))
(pin (num 19) (name ADC6) (type input))
(pin (num 20) (name AREF) (type BiDi))
(pin (num 21) (name GND) (type power_in))
(pin (num 22) (name ADC7) (type input))
(pin (num 23) (name "(PCINT8/ADC0)PC0") (type BiDi))
(pin (num 24) (name "(PCINT9/ADC1)PC1") (type BiDi))
(pin (num 25) (name "(PCINT10/ADC2)PC2") (type BiDi))
(pin (num 26) (name "(PCINT11/ADC3)PC3") (type BiDi))
(pin (num 27) (name "(PCINT12/SDA/ADC4)PC4") (type BiDi))
(pin (num 28) (name "(PCINT13/SCL/ADC5)PC5") (type BiDi))
(pin (num 29) (name "(PCINT14/~RESET~)PC6") (type BiDi))
(pin (num 30) (name "(PCINT16/RXD)PD0") (type BiDi))
(pin (num 31) (name "(PCINT17/TXD)PD1") (type BiDi))
(pin (num 32) (name "(PCINT18/INT0)PD2") (type BiDi))))
(libpart (lib flabbergast) (part ATSHA204A_3LEAD)
(description "ATSHA204A_3LEAD ATMEL crypto chip")
(footprints
(fp SOT-23*))
(fields
(field (name Reference) U)
(field (name Value) ATSHA204A_3LEAD)
(field (name Footprint) SOT-23_Handsoldering))
(pins
(pin (num 1) (name SDA) (type BiDi))
(pin (num 2) (name VCC) (type power_in))
(pin (num 3) (name GND) (type power_in))))
(libpart (lib Device) (part Battery_Cell)
(description "single battery cell")
(fields
(field (name Reference) BT)
(field (name Value) Battery_Cell))
(pins
(pin (num 1) (name +) (type passive))
(pin (num 2) (name -) (type passive))))
(libpart (lib Device) (part C_Small)
(description "Unpolarized capacitor")
(footprints
(fp C_*))
(fields
(field (name Reference) C)
(field (name Value) C_Small))
(pins
(pin (num 1) (name ~) (type passive))
(pin (num 2) (name ~) (type passive))))
(libpart (lib Connector_Generic) (part Conn_01x01_Female)
(description "Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/)")
(docs ~)
(footprints
(fp Connector*:*_1x??_*))
(fields
(field (name Reference) J)
(field (name Value) Conn_01x01_Female))
(pins
(pin (num 1) (name Pin_1) (type passive))))
(libpart (lib Connector_Generic) (part Conn_01x02)
(description "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)")
(docs ~)
(footprints
(fp Connector*:*_1x??_*))
(fields
(field (name Reference) J)
(field (name Value) Conn_01x02))
(pins
(pin (num 1) (name Pin_1) (type passive))
(pin (num 2) (name Pin_2) (type passive))))
(libpart (lib Connector_Generic) (part Conn_01x14)
(description "Generic connector, single row, 01x14, script generated (kicad-library-utils/schlib/autogen/connector/)")
(docs ~)
(footprints
(fp Connector*:*_1x??_*))
(fields
(field (name Reference) J)
(field (name Value) Conn_01x14))
(pins
(pin (num 1) (name Pin_1) (type passive))
(pin (num 2) (name Pin_2) (type passive))
(pin (num 3) (name Pin_3) (type passive))
(pin (num 4) (name Pin_4) (type passive))
(pin (num 5) (name Pin_5) (type passive))
(pin (num 6) (name Pin_6) (type passive))
(pin (num 7) (name Pin_7) (type passive))
(pin (num 8) (name Pin_8) (type passive))
(pin (num 9) (name Pin_9) (type passive))
(pin (num 10) (name Pin_10) (type passive))
(pin (num 11) (name Pin_11) (type passive))
(pin (num 12) (name Pin_12) (type passive))
(pin (num 13) (name Pin_13) (type passive))
(pin (num 14) (name Pin_14) (type passive))))
(libpart (lib Device) (part Crystal)
(description "Two pin crystal")
(footprints
(fp Crystal*))
(fields
(field (name Reference) Y)
(field (name Value) Crystal))
(pins
(pin (num 1) (name 1) (type passive))
(pin (num 2) (name 2) (type passive))))
(libpart (lib Timer_RTC) (part DS1307+)
(aliases
(alias DS1307N+)
(alias DS1307Z+))
(footprints
(fp SO8E)
(fp DIP-8_300_ELL))
(fields
(field (name Reference) U)
(field (name Value) DS1307+))
(pins
(pin (num 1) (name XTAL1) (type input))
(pin (num 2) (name XTAL2) (type output))
(pin (num 3) (name VBAT) (type input))
(pin (num 4) (name GND) (type power_in))
(pin (num 5) (name SDA) (type BiDi))
(pin (num 6) (name SCL) (type input))
(pin (num 7) (name SQW/OUT) (type output))
(pin (num 8) (name VCC) (type power_in))))
(libpart (lib Device) (part LED_Small_ALT)
(description "LED, small symbol, alternativ symbol")
(docs ~)
(footprints
(fp LED*))
(fields
(field (name Reference) D)
(field (name Value) LED_Small_ALT))
(pins
(pin (num 1) (name K) (type passive))
(pin (num 2) (name A) (type passive))))
(libpart (lib RF_AM_FM) (part RFM69HW)
(aliases
(alias RFM69W))
(description "ISM Radio Transciever Module, SPI interface")
(docs http://www.hoperf.com/upload/rf/RFM69HW-V1.3.pdf)
(footprints
(fp HOPERF*RFM69HW*))
(fields
(field (name Reference) U)
(field (name Value) RFM69HW)
(field (name Footprint) RF_Module:HOPERF-RFM69HW))
(pins
(pin (num 1) (name RESET) (type input))
(pin (num 2) (name DIO0) (type BiDi))
(pin (num 3) (name DIO1) (type BiDi))
(pin (num 4) (name DIO2) (type BiDi))
(pin (num 5) (name DIO3) (type BiDi))
(pin (num 6) (name DIO4) (type BiDi))
(pin (num 7) (name DIO5) (type BiDi))
(pin (num 8) (name 3.3V) (type power_in))
(pin (num 9) (name GND) (type power_in))
(pin (num 10) (name ANA) (type output))
(pin (num 11) (name GND) (type passive))
(pin (num 12) (name SCK) (type input))
(pin (num 13) (name MISO) (type output))
(pin (num 14) (name MOSI) (type input))
(pin (num 15) (name NSS) (type input))
(pin (num 16) (name NC) (type NotConnected))))
(libpart (lib Device) (part R_Pack04)
(description "4 Resistor network, parallel topology, DIP package")
(footprints
(fp DIP*)
(fp SOIC*))
(fields
(field (name Reference) RN)
(field (name Value) R_Pack04))
(pins
(pin (num 1) (name R1.1) (type passive))
(pin (num 2) (name R2.1) (type passive))
(pin (num 3) (name R3.1) (type passive))
(pin (num 4) (name R4.1) (type passive))
(pin (num 5) (name R4.2) (type passive))
(pin (num 6) (name R3.2) (type passive))
(pin (num 7) (name R2.2) (type passive))
(pin (num 8) (name R1.2) (type passive))))
(libpart (lib Device) (part R_Small)
(description "Resistor, small symbol")
(footprints
(fp R_*))
(fields
(field (name Reference) R)
(field (name Value) R_Small))
(pins
(pin (num 1) (name ~) (type passive))
(pin (num 2) (name ~) (type passive))))
(libpart (lib Jumper) (part SolderJumper_3_Open)
(description "Solder Jumper, 3-pole, open")
(docs ~)
(footprints
(fp SolderJumper*Open*))
(fields
(field (name Reference) JP)
(field (name Value) SolderJumper_3_Open))
(pins
(pin (num 1) (name A) (type passive))
(pin (num 2) (name C) (type input))
(pin (num 3) (name B) (type passive)))))
(libraries
(library (logical Timer_RTC)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/Timer_RTC.lib))
(library (logical Connector_Generic)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/Connector_Generic.lib))
(library (logical Jumper)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/Jumper.lib))
(library (logical Device)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/Device.lib))
(library (logical RF_AM_FM)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/RF_AM_FM.lib))
(library (logical flabbergast)
(uri /Users/js/dynamic/general/repos/kicad/flabbergast.lib))
(library (logical MCU_Atmel_ATMEGA)
(uri /Users/js/dynamic/general/repos/kicad/kicad-symbols/MCU_Atmel_ATMEGA.lib)))
(nets
(net (code 1) (name "Net-(C7-Pad1)")
(node (ref C7) (pin 1))
(node (ref Y2) (pin 1))
(node (ref U1) (pin 8)))
(net (code 2) (name +5V)
(node (ref J1) (pin 5)))
(net (code 3) (name "Net-(J4-Pad1)")
(node (ref U2) (pin 10))
(node (ref J4) (pin 1)))
(net (code 4) (name RF_SEL)
(node (ref JP1) (pin 2))
(node (ref U2) (pin 15)))
(net (code 5) (name "Net-(D1-Pad2)")
(node (ref RN1) (pin 1))
(node (ref D1) (pin 2)))
(net (code 6) (name "Net-(D2-Pad2)")
(node (ref D2) (pin 2))
(node (ref RN1) (pin 2)))
(net (code 7) (name MOSI)
(node (ref U1) (pin 15))
(node (ref J1) (pin 11))
(node (ref U2) (pin 14)))
(net (code 8) (name MISO)
(node (ref U1) (pin 16))
(node (ref U2) (pin 13))
(node (ref J1) (pin 12)))
(net (code 9) (name SCK)
(node (ref J1) (pin 13))
(node (ref U2) (pin 12))
(node (ref U1) (pin 17)))
(net (code 10) (name BB_TX)
(node (ref U1) (pin 30))
(node (ref J1) (pin 2)))
(net (code 11) (name BB_RX)
(node (ref J1) (pin 1))
(node (ref U1) (pin 31)))
(net (code 12) (name RF_IRQ)
(node (ref U2) (pin 2))
(node (ref JP2) (pin 2)))
(net (code 13) (name MG_CS)
(node (ref JP1) (pin 3))
(node (ref U1) (pin 14)))
(net (code 14) (name MG_INT0)
(node (ref U1) (pin 32))
(node (ref JP2) (pin 3)))
(net (code 15) (name RF_RST)
(node (ref U1) (pin 2))
(node (ref U2) (pin 1)))
(net (code 16) (name RF_DIO5)
(node (ref U1) (pin 9))
(node (ref U2) (pin 7)))
(net (code 17) (name EX_LED)
(node (ref U1) (pin 13))
(node (ref RN1) (pin 5)))
(net (code 18) (name ERR_LED)
(node (ref U1) (pin 10))
(node (ref RN1) (pin 8)))
(net (code 19) (name TX_LED)
(node (ref U1) (pin 11))
(node (ref RN1) (pin 7)))
(net (code 20) (name "Net-(D4-Pad2)")
(node (ref RN1) (pin 4))
(node (ref D4) (pin 2)))
(net (code 21) (name "Net-(D3-Pad2)")
(node (ref RN1) (pin 3))
(node (ref D3) (pin 2)))
(net (code 22) (name GND)
(node (ref C5) (pin 2))
(node (ref U3) (pin 4))
(node (ref U4) (pin 3))
(node (ref C4) (pin 2))
(node (ref D1) (pin 1))
(node (ref J3) (pin 2))
(node (ref C2) (pin 2))
(node (ref J1) (pin 6))
(node (ref J1) (pin 9))
(node (ref C3) (pin 2))
(node (ref C6) (pin 2))
(node (ref BT1) (pin 2))
(node (ref U2) (pin 9))
(node (ref U2) (pin 11))
(node (ref U1) (pin 3))
(node (ref U1) (pin 5))
(node (ref U1) (pin 21))
(node (ref D4) (pin 1))
(node (ref D3) (pin 1))
(node (ref D2) (pin 1))
(node (ref R5) (pin 1))
(node (ref C7) (pin 2))
(node (ref C8) (pin 2)))
(net (code 23) (name "Net-(U1-Pad22)")
(node (ref U1) (pin 22)))
(net (code 24) (name "Net-(U1-Pad1)")
(node (ref U1) (pin 1)))
(net (code 25) (name BB_BAT)
(node (ref J2) (pin 1))
(node (ref J3) (pin 1)))
(net (code 26) (name "Net-(U1-Pad28)")
(node (ref U1) (pin 28)))
(net (code 27) (name "Net-(U1-Pad27)")
(node (ref U1) (pin 27)))
(net (code 28) (name "Net-(U1-Pad25)")
(node (ref U1) (pin 25)))
(net (code 29) (name "Net-(U1-Pad24)")
(node (ref U1) (pin 24)))
(net (code 30) (name "Net-(U1-Pad23)")
(node (ref U1) (pin 23)))
(net (code 31) (name RX_LED)
(node (ref U1) (pin 12))
(node (ref RN1) (pin 6)))
(net (code 32) (name ATSHA)
(node (ref U1) (pin 26))
(node (ref U4) (pin 1))
(node (ref R1) (pin 2)))
(net (code 33) (name +3V3)
(node (ref R4) (pin 1))
(node (ref C3) (pin 1))
(node (ref U1) (pin 18))
(node (ref J1) (pin 10))
(node (ref C2) (pin 1))
(node (ref C6) (pin 1))
(node (ref R3) (pin 1))
(node (ref U1) (pin 20))
(node (ref C5) (pin 1))
(node (ref R1) (pin 1))
(node (ref R2) (pin 1))
(node (ref C4) (pin 1))
(node (ref U4) (pin 2))
(node (ref U2) (pin 8))
(node (ref U3) (pin 8))
(node (ref U1) (pin 4))
(node (ref U1) (pin 6)))
(net (code 34) (name "Net-(J2-Pad2)")
(node (ref R5) (pin 2))
(node (ref J2) (pin 2)))
(net (code 35) (name BB_SDA)
(node (ref R2) (pin 2))
(node (ref U3) (pin 5))
(node (ref J1) (pin 4)))
(net (code 36) (name BB_SCL)
(node (ref R3) (pin 2))
(node (ref U3) (pin 6))
(node (ref J1) (pin 3)))
(net (code 37) (name BB_GPIO65)
(node (ref J1) (pin 7))
(node (ref JP2) (pin 1)))
(net (code 38) (name BB_CS)
(node (ref JP1) (pin 1))
(node (ref J1) (pin 14)))
(net (code 39) (name BB_GPIO27)
(node (ref U1) (pin 29))
(node (ref R4) (pin 2))
(node (ref J1) (pin 8)))
(net (code 40) (name "Net-(BT1-Pad1)")
(node (ref U3) (pin 3))
(node (ref BT1) (pin 1)))
(net (code 41) (name "Net-(U3-Pad1)")
(node (ref U3) (pin 1))
(node (ref Y1) (pin 1)))
(net (code 42) (name "Net-(U3-Pad2)")
(node (ref Y1) (pin 2))
(node (ref U3) (pin 2)))
(net (code 43) (name "Net-(U3-Pad7)")
(node (ref U3) (pin 7)))
(net (code 44) (name "Net-(C8-Pad1)")
(node (ref C8) (pin 1))
(node (ref Y2) (pin 2))
(node (ref U1) (pin 7)))
(net (code 45) (name "Net-(U2-Pad16)")
(node (ref U2) (pin 16)))
(net (code 46) (name "Net-(U2-Pad6)")
(node (ref U2) (pin 6)))
(net (code 47) (name "Net-(U2-Pad5)")
(node (ref U2) (pin 5)))
(net (code 48) (name "Net-(U2-Pad4)")
(node (ref U2) (pin 4)))
(net (code 49) (name "Net-(U2-Pad3)")
(node (ref U2) (pin 3)))
(net (code 50) (name "Net-(U1-Pad19)")
(node (ref U1) (pin 19)))))

View File

@ -0,0 +1,47 @@
update=Saturday, 27 January 2018 'amt' 09:11:10
version=1
last_client=kicad
[cvpcb]
version=1
NetITyp=0
NetIExt=.net
PkgIExt=.pkg
NetDir=
LibDir=
NetType=0
[cvpcb/libraries]
EquName1=devcms
[pcbnew]
version=1
PageLayoutDescrFile=
LastNetListRead=
UseCmpFile=1
PadDrill=0.762
PadDrillOvalY=0.762
PadSizeH=1.524
PadSizeV=1.524
PcbTextSizeV=0.6
PcbTextSizeH=0.6
PcbTextThickness=0.127
ModuleTextSizeV=0.6
ModuleTextSizeH=0.6
ModuleTextSizeThickness=0.127
SolderMaskClearance=0.05
SolderMaskMinWidth=0
DrawSegmentWidth=0.127
BoardOutlineThickness=0.127
ModuleOutlineThickness=0.127
[general]
version=1
[eeschema]
version=1
LibDir=../kicad-symbols;../../kicad
[eeschema/libraries]
LibName1=flabbergast
LibName2=MCU_Atmel_ATMEGA
LibName3=RF_AM_FM
LibName4=Timer_RTC
LibName5=Connector_Generic
LibName6=Device
LibName7=power
LibName8=Jumper

File diff suppressed because it is too large Load Diff